How to install Creo 2.0/3.0/5.0 with PTC_Creo_Patcher_SSQ?

Procedure for installation of Creo:

Step 1:

• Open Crack: Go to PTC_Licfile.
• Replace the file ID with the Real PTC Host ID.
• For that go to “cmd”and click on Enter button.
• Type ipconfig/all and hit Enter.
• You will find “Ethernet Adaptor Local Area Connection” and its Physical Address.
• Repalce the File ID with this Physical address.
• For that Go to PTC_Licfile and say Edit-replace.
• Find what:No. in the PTC_File
• Replace with:Real Host PTC ID.
• Replace all and hit Save.

Step 2:

• Go to PTC Creo Multi language and say Setup.
• Click-Install New Software-Next-I Accept.
• Below You can find Licence Summary.
• Drag the PTC file into the box provided in the Licence Summary.
• It says Available-Next-Un Tick Check box below and say Customize.
• Goto the Creo Parametric which is on the left side  and tick on OPTIONS,API Tool Kits,Interfaces-Next-Install-processing-100%-Finish.

Step 3:

Patching:

• Go to Crack and click on PTC_Patcher_SSQ.
• A Dialogue box opens-Click on Look for-C:Program files-Creo 2.0-common files-M010–Look for–START.
• It says “All files seemed to be-enjoy!”.
• Go to Look For–Creo 2.0Distributed Services Manager–Look for–START.
• It says “All files seemed to be-enjoy!”.

Step  4:

That’s  it…Open the Creo 2.0 file in the desktop by the name Creo Parametric and do the modelling.

You can also know about:

• How to complete ANSYS 15.0 Installation in Just 4 Steps?
• How do we use CATIA V5 Workbench?
• How to model the shaft of an Automobile in CATIA V5?

To get the detailed information about installation,watch the video mentioned below.