Mechanical Engineering Projects

(99+Updated) Automobile Engineering Projects list for Mechanical Students

(99+Updated) Automobile Engineering Projects list for Mechanical Students:Automobile Engineering Projects are widely taken by the students of graduates,post graduates,Diploma etc as their project works in the college.If you are travelling from one place to another place then the compulsory mode of transport is the Automobile.Without that,our journey will be late.A wide variety of Automobile companies are present in the world who can produce different types of branded automobiles from their work units for the sake of customers.Each Automobile consists of various parts and you can do any type of project with these parts.Therefore,In this article,I will be exploring the list of (99+Updated) Automobile Engineering Projects for Mechanical Students in a broader way.

(99+Updated) Automobile Projects list for Mechanical Students
(99+Updated) Automobile Engineering Projects list for Mechanical Students

List of (99+Updated) Automobile Engineering Projects  for Mechanical Students:

A list of Automobile Engineering Projects for Mechanical Engineering Students was presented below.

  1. Automatic Vehicle Over Speed Indication And Controlling System
  2. Performance and emission study of biodiesel engine using electronic fuel injection system 
  3. Automatic Train Station Announcement System With Bomb Detection
  4. Engine Overheat Alarm
  5. Emergency Braking System
  6. GPS Based Automatic Vehicle Accident Information System –Two Wheeler
  7. Fabrication Of Solar And Wind Train
  8. Hand Propulsion And Steering Dampening For Three wheelers
  9. GPS Based Automatic Vehicle Accident Information System –Three and Four Wheeler
  10. Remote Controlled Solar Vehicle
  11. Sensor Operated Automated Track Guided Vehicle (ATGV).
  12. Regenerative Braking System
  13. Solar Based Electromagnetic Breaking System
  14. Experimental set up to study the gyroscopic couple due to processional motion 
  15. Automatic Distance Measurement And Braking System Using Ultrasonic
  16. Battery Cycle
  17. Motorized Screw Jack
  18. Fabrication Of Industrial Trolley
  19. Automatic Gear Transmission For Two Wheeler
  20. Anti-Lock Braking System
  21. Automatic Accident Avoiding System In Machine or in Vehicle
  22. To study the performance of CI engine using the binary mixtures of alternative fuels 
  23. Automated Track Guided Vehicle
  24. Automatic Acceleration Controlling System In
    Traffic Signals
  25. Fabrications Of Rice Planting Machine , Manual Operated
  26. Fabrications Of Driverless Train Technology Advanced Wireless
  27. Fabrication Of Mechanical Grass Cutter Machine(Using Bevel Gears Arrangement)
  28. Fabrication Of Rocker Bogie Suspension System
  29. Improving fuel economy and engine life microprocessor based mobile gear level indicator 
  30. Fabrication Of Camshaft
  31. Redesigning and Testing of cadi 50cc 4stroke Moped 
  32. Fabrication Of Electrical Power Generation From Shock Absorber
  33. Design and Fabrication of three wheeler for physically handicapped 
  34. Fabrications Of Electromagnetic Piston Engine
  35. Electromagnetically assisted advanced drum brake mechanism 
  36. Fabrication Of Regenerative Braking System
  37. To study the performance of two stroke engine with modified intake system 
  38. Fabrications Of Compressor Air Engine For Four Wheeler (Air Power Car)
  39. A Project on Accident prevention mechanism in automobiles 
  40. Fabrications Of Solar Power Vehicle For Four Wheeler
  41. Automatic head light control for 4 wheelers 
  42. Fabrication Of 90 Degree Steering Mechanism
  43. A Project on Optical valve timing encoder 
  44. Fabrication Of Mechanical Grass Cutter
  45. Fabrications Of Wind Power Car For Four Wheeler
  46. Bullock Cart With Material Lifting And Dumping Mechanism
  47. Agriculture Field Using Axles, Spur And Pinion Gears, Lead Screw And Nut Mechanism with Automatic Input To Show The Mechanism.
  48. Fabrication Of Tilting Vehicle Mechanism For Four Wheeler
  49. Design and Fabrication of propeller shaft
  50. Comparative studies of solar stills 
  51. Lubrication of LPG system for mopeds 
  52. A Project on Starter Motor Test Rig 
  53. Human awakening system interface of microprocessor 
  54. A Project on Wind power to charge battery in automobile 
  55. Selection of exhaust gas recirculation in 2-stroke SI engines
  56. Design and Fabrication of valve lapping machine 
  57. Drum seeder for paddy cultivators for the improvement of crop
  58. A Project on Modification of carburetor 
  59. Performance and emission study of 4-stroke SI engine with copper coating on combustion chamber 
  60. Application of LPG for mopeds
  61. Battery operated magnetic force assisted mechanical braking system 
  62. . Performance of 50cc moped ( TVS-Champ) by using different carburetors 
  63. Speed control of radiator fan using differential gear arrangement
  64. Vehicle aerodynamics and its performance characteristics 
  65. Externally charged battery assisted tricycle for legless or Handicapped 
  66. Performance and emission study of diesel engine using fuel ionizer for various bio diesel mode
  67. Cotton seed oil as an alternative fuel for 4-stroke I.engine
  68. Automatic guided vehicle with remote controlled lifting trolley
  69. A Project on Intelligent overtaking mechanism
  70. Fuel Injection system for a two stroke petrol engine 
  71. Design and Fabrication of hydraulic press 
  72. Smart infrared proximity detector 
  73. Microprocessor based preprogramming controlled vehicle 
  74. A Project on Portable water servicing pump 
  75. A Project on Automated gear shifting mechanism
  76. Design of Brake Lock for hydraulic brake systems  
  77. Ignition control to improve the combustion efficiency of IC engine 
  78. A Project on Traffic lane marker 
  79. Catalytic converter for two wheelers as a case study 
  80. Automatic vehicle monitoring and control 
  81. Comparative study of direct injection C.I engine using various alternative fuels 
  82. A Project on Gas Injected Spark Ignition Engine 
  83. Brake Performance of Electronic Tester 
  84. Parametric study to reduce noise from Diesel Engines
  85. Self-locking mechanism for reverse motion 
  86. A Project on Electric bike 
  87. A Project on Tyre pressure auto governing system 
  88. A Project on Eddy current braking system 
  89. Microprocessor controlled two wheeler speed regulator 
  90. Solar water distiller for rural areas 
  91. A Project on Hovercraft 
  92. A Project on Automotive Emission Control 
  93. Electro Pneumatic Clutch Controlling Mechanism 
  94. Pollution control through a S.I Engines
  95. A Project on Hinged Jack 
  96. Biogas purification for C.I engine operation 
  97. Environment friendly two stroke engine 
  98. A Project on Solar Electric Vehicle 
  99. Design and Fabrication of four seater car 
  100. Microprocessor based speed control of DC shunt motor 

You should also aware of:

This is the complete 99+ updated list of Automobile Engineering Projects in a broader way.Hope this list of Automobile Engineering Projects will be helpful to you.If you have any doubts, feel free to ask from the comments section. Please Share and Like this blog with the whole world so that it can reach to many.

Want to learn more about Mechanical Engineering Projects in 28+ fields,then look at the table presented below:

28+ Domains of Mechanical Engineering Projects:

The Mechanical Engineering Projects of 28+ Domains are as follows.

S.NOName of the Mechanical Engineering Domain
1Mechanical Projects Ideas (2017-2018) of all domains in Mechanical Engineering
2280+Updated list of Mini Projects for Mechanical Engineering 3rd Year Students
3640+Updated Major Projects for Mechanical Engineering Students
4(100+Updated) Thermal Engineering Projects List for Mechanical and Diploma Students
5(90+Updated) CFD Projects List for Mechanical and Diploma Students
6(240+Updated) Mechanical Projects list for Diploma and Mechanical Students
7650+Updated Mechanical Engineering Project Ideas of all Domains
8(100+Updated) Manufacturing Projects List for Mechanical and Diploma Students
9(99+Updated) Automobile Engineering Projects list for Mechanical Students
10(80+Updated) Agriculture Projects List for Mechanical students
1145+Updated list of Aeronautical and Marine Projects for Mechanical Students
12125+Updated List of Automation and Mechatronics projects for Mechanical students
13 (70+Updated) CAD/CAM Projects List for Mechanical Students
14Updated list of CNC Vertical Milling Projects for Mechanical students
15(130+Updated) Robotics Projects List for Mechanical and Diploma Students
16Updated list of Composite Projects for Mechanical Students
17130+Updated Conventional and Non-conventional projects For Mechanical Students 2017
18 Updated Projects list of Tool,Die,Jigs and Fixtures for Mechanical Engineering students
19 90+ Updated Experimental Projects for Mechanical Engineering Students
20 Propulsion Projects for Mechanical Engineering Students
21 115+Updated projects on Hydraulics and Pneumatics for Mechanical Engineering Students
22 Optimization Projects for Mechanical Engineering Students
23 100+ Updated FEA Analysis Projects in Mechanical Engineering
24 Press Tool Projects for Mechanical Engineering Students
25 Cryo-Treated Machining Process Projects for Mechanical Engineering students
26 Laser Projects for Mechanical Engineering Students
27 GMAW Welding Projects for Mechanical Engineering Students
28 Plasma Projects for Mechanical Engineering Students
29EDM Projects for Mechanical Engineering Students

The above Tabular Column indicates the the Mechanical Engineering Projects of 28+ Domains in a detailed manner.

Individual Mechanical Engineering Projects:

The Individual Mechanical Engineering Projects are shown below which consists of Abstract,Explanation and Figure in a detailed way.

S.NOName of the Mechanical Engineering Domain
1Generating NC Program of Journal Bearing using NX CAM software
2Development of CNC Program for End Shield by Unigraphics Software
3Automatic Speed Control In 4-wheeler by Cruise Control
4A Project on Modelling and Manufacturing of Input Shaft using Computer Aided Manufacturing

This is the Individual list of Mechanical Engineering Projects which is explained with the help of Abstract and Figures.

Finally,All Domains of Mechanical Engineering Projects are placed under one roof which is a best idea and this idea will be helpful for all the Mechanical Engineering Aspirants.

Hope This Article is Helpful to you.If you have any Doubts,Feel free to ask from the comments section.

Like this Article…?Then Share it…

 

 

One Comment

  1. Hello.
    Send report in mechanical project Bullock Cart With Material Lifting And Dumping Mechanism
    Agriculture Field Using Axles, Spur And Pinion Gears, Lead Screw And Nut Mechanism with Automatic Input To Show The Mechanism.

    Reply

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

error: Content is protected !!