Shaft feature with Neutral fiber in CATIA V5:Shaft feature is used to create a circular solid component but Shaft feature with Neutral fiber is used to keep the outer circular shaft of required dimensions only but not the inner in the whole component.In this article, I am going to explain about how to use Shaft feature with Neutral fiber in CATIA V5 in a detailed manner.
The step by step procedure is to be needed to adopt the usage of Shaft feature with Neutral fiber in CATIA V5 and is as follows.
Procedure of Shaft feature with Neutral fiber in CATIA V5:
- The procedure of Shaft feature with merge ends in CATIA V5 is same as the Shaft feature in catia v5 which is discussed earlier.
- During the process when the dialogue box arises in Shaft feature there is an option called Neutral fiber which is to be enabled to make the changes in the structure or component.
- That’s it.The component will be made by the shaft feature with Neutral fiber.
You can also know about:
This is the complete explanation of Shaft feature with Neutral fiber which is shown in a detailed manner. If you have any doubts, feel free to ask from the comments section. Please Share and Like this blog with the whole world so that it can reach to many.