In automobiles, Sliding Mesh Gearbox is one of the transmission system which is of oldest type. As we have two types of Transmission systems, one is the Manual Transmission and the other is Automatic Transmission.

In the last session, we had discussed the Cone clutch, Electromagnetic clutch, and Single Plate Clutch and whereas we are moving towards the Transmission system i.e. Gearbox where we can discuss different types of Gearbox in detailed.

Sliding Mesh Gearbox will come under Manual Transmission and to overcome the limitations of Sliding Mesh Gearbox, Constant Mesh Gear box and Synchromesh Gear box has come into picture.

Now, Let’s dive into the concept of Sliding Mesh Gearbox.

Components of Sliding Mesh Gearbox:

The Components of Sliding Mesh Gearbox are as follows:

1. Shafts

  • Clutch shaft
  • Lay Shaft
  • Main Shaft

2. Gears

  • Fixed Gears
  • Movable Gears
  • Idler Gear
  • Clutch Gear

3. Gear Lever

The explanation for the Components of Sliding Mesh Gearbox

#1 Shafts:

The shaft is generally used to transmit the power from one end to another end. There are three types of shafts in the case of Sliding Mesh Gearbox.

Clutch Shaft:

The clutch shaft is used to transmit the power from engine when the clutch is in engaged position. When the clutch shaft is rotating, the clutch gear which is attached at the end of it also rotates along with the clutch shaft.

Lay Shaft:

The lay shaft is an intermediate shaft between the clutch shaft and the Main shaft which provides meshing of fixed gears to the movable gears to provide the output appropriately.

The fixed gears are attached to the lay shaft and they are in mesh with the gears of main shaft and the gear of clutch shaft.

Main Shaft:

This shaft acts as an output shaft for the transmission of power from the engine shaft via lay shaft. The gears with internally splined groves are arranged on the main shaft so that they can mesh easily with the gears of lay shaft.

#2 Gears:

Fixed Gears:

These gears are attached to lay shaft for proper mesh with the gears of main shaft. As they are fixed, if one gear rotates then all the gears rotate along with lay shaft also.

Movable Gears:

These gears are attached to the Main shaft and are independent. It means, if one gear rotates, then other gears does not rotate w.r.t. the shaft. As the vehicle has to move in any of one gear (might be 1st,2nd ,3rd or 4th), so there is no need for the rotation of another gear.

Idler Gear:

This gear is used when the vehicle needs to move in the reverse direction. This gear places its position in the centre of lay shaft gear and main shaft gear and thus the reverse action is taking place in the vehicle.

Clutch Gear:

This gear is attached at the end of clutch shaft for transmitting power from the engine to the lay shaft and main shaft respectively.

#3 Gear Lever:

This lever is used by the driver to change the gear by means of selective mechanism.

Working of Sliding Mesh Gearbox:

The Sliding Mesh Gear box uses Spur Gears for the transmission of power from the engine shaft to the main shaft. It generally consists of 3 shafts i.e. Clutch shaft, Lay shaft and Main Shaft whose explanation was given above.

sliding-mesh-gearbox

It is a transmission mechanism of Just 4 gears and out of these 4, one is the reverse gear. So here we have 1st gear, 2nd gear, Top gear and the Reverse gear.

The power comes from the engine to the clutch shaft and thence to the clutch gear which is always attached at the end of clutch shaft. All the gears on the lay shaft are fixed and are in mesh with the clutch gear and main shaft gears.

Let’s understand how the 4 gears mesh for the transmission of power. Here, the driving shaft is the Lay shaft and the driven shaft is the Main shaft.

First Gear:

As you know that the vehicle moves slowly in the first gear compared to all the other driving gears this is because the gear of the driving shaft (lay shaft) is small compared to the gear of the driven shaft (Main Shaft).

Due to this, it acquires maximum torque at low speed and this can be obtained by meshing the smallest gear (C) on the lay shaft to the biggest gear (D) on the main shaft.

Second Gear:

The Torque acquired is smaller and the speed acquired is larger than the first gear and this can be obtained when the middle size gear (F) of the main shaft meshes with the second smallest gear (E) of the lay shaft.

Third Gear:

Third Gear is the Top gear which provides Maximum speed and Minimum Torque and this is obtained when the middle gear (F) of the main shaft is in mesh with the clutch gear (A) by means of dog clutch.

Due to this, at top gear the vehicle moves at a higher speed because the engagement of clutch shaft is equal to the main shaft.

Therefore, with the speed of clutch shaft, the main shaft rotates for the transmission of power.

Reverse Gear:

Here the idler gear is to be placed in between the bigger diameter gear (D) of the main shaft and smaller diameter gear (G) of the lay shaft. Therefore, the vehicle moves in reverse direction.

In this way, by the usage of 3 driving gears and 1 reverse gear the power transmission takes place in the Sliding Mesh Gear box.

Advantages of Sliding Mesh Gearbox:

Here are some advantage of Sliding Mesh Gearbox:

  • The mechanism of this gearbox is simple comared to Constant Mesh Gearbox and Synchromesh Gearbox.
  • There should be less fluctuating loads because only one gear is in mesh at at time.

Disadvantages of Sliding Mesh Gearbox:

These are some disadvantages of Sliding Mesh Gearbox:

  • The Mechanical Efficiency was very low in the case of Sliding Mesh Gearbox.
  • The driver requires considerable skill for changing the gears because the gears of main shaft and lay shaft are away from each other.

Applications of Sliding Mesh Gearbox:

  1. Renault Voiturette used manual 3-speed transmission.
  2. Mercedes 35HP used 4-speed manual transmission

To avoid the disadvantage of Sliding Mesh Gearbox, Constant Mesh Gearbox has came into picture and that concept will be discussed in the next article.

More Resources:

Single Plate Clutch
Electromagnetic Clutch
Cone Clutch

Reference [External Links]:


Media Credits:


Feature Image: Modified By Author

Print Friendly, PDF & Email

Mohammed SHAFI

Mr. Mohammed Shafi is an Assistant Professor at Sreenidhi Institute of Science & Technology. By education, he is a Mechanical Engineer and expertise in CAD & CAM. Mechanical Students is his first...

Leave a comment

Your email address will not be published. Required fields are marked *

 

This site uses Akismet to reduce spam. Learn how your comment data is processed.